Table of Contents
Advertisement
BASIC TELEPHONE OPERATIONS
There are 4 ringer styles. The current setting is displayed.
• Press
or
to hear the other ring
• When the desired ringer type is blinking, press SELECT.
L 2
CONFERENCE CALLING
To talk to both lines at the same time:
1. While you are one line, press HOLD.
2. Make or receive a call on the avaiable line.
3. Press CONF. You are now talking to both lines.
4. To end your conference call, press OFF.
The procedure is the same for the Handset and Base. Whichever you are using,CONFERENCE
is displayed on the screen.
To place both lines on hold, press HOLD. Press CONF to return to the conference call. To
switch from Handset to Base ( or vice versa), press HOLD on whichever component you're
using, then CONF on the other.
NOTE: Both the Handset and Base can join in the Conference call.
styles OR turn the Handset ringer OFF.
BASE UNIT RINGER
The Base Unit ringer volume is controlled by a switches
on the right edge of the Base Each line can be set to Off,
Low, or High volume.
13
Advertisement
Table of Contents
