Content - VIETA HMD400 User Manual

8.Number Keys and Time Selcetion
In playing songs ,press number keys(1~9) to directly select the songs you need.If the songs you want exceed 10th piece,
you may do it by pressing 10+ key, and then press the number keys 1~9.For example:If 12th song is needed,you can
press 10+ key first and press number key 2 to select
this song. In play status ,press TIME key ,TV screen display:
VCD/CD disc display: track:_ _: time:_ _:
DVD disc display: title: _ _: chapter:_ _:
Then you can press direction keys to move the cursor according to the above-mentioned screen suggestions, use number
keys to input the corresponding time numbers ,and then enter after it is done, DVD player will start to play according to the
set time.
9.Repeat and A-B Repeat
When playing DVD disc,press REPEAT key once,the section will be repeated playing.Press the key twice,the content in
the title will be repeated playing.Press the key three times,the whole disc will berepeated .Press the key four times,exit to
the repeat opreation.
When playing CD/VCD disc, press REPEAT key once,the current content will be repeated.Press the key twice,the whole
disc will be repeated .Press the key three timess,exit to the repeat opreation.
In play status,press A-B key once to set the jumping-off point of the A-B repeat,press the key twice to set the end-point of
the A-B repeat,press the key three time to exit the A-B repeat opertion.
10.Pause,Stop
In play status press PAUSE key on the remote control,the device will be pause playing,then press PLAY/ENTER key to
continue playing.
In play status press PLAY/PAUSE key on the front panel,the device will be pause playing,then press the key twice to
continue playing.
In play status, press STOP key on the remote control,the TV screen will return to the picture of switching on,and the
device is half-stop status; press the key twice the TV screen will return to the picture of switching on and the device
stop.Then press number keys or PLAY/ENTER key,the disc will be played.
11.Video
In play or stop status press VIDEO key on the remote control,the device will switch its video-output interface :
TV-RGB,P-SCAN,S-VIDEO,INTERFACE YUV.
12.PAL/NTSC
Press P / N key on the remote to display current TV system.
Press the P / N key again to change to the next TV system. There offers four systems: NTSC, PAL, and AUTO. With
each consecutive press of the key, the TV system switches. If youpress the key five times, the TV system cycles back.
13.Zoom
The Zoom Function allows you to enlarge or zoom out the video image . Press ZOOM key repeatedly to activate the
function and choose the required zoom factor: Zoom 1, Zoom 2, Zoom 3, Zoom 1/2, Zoom 1/3, Zoom 1/4, Zoom Off.
Note:
*This feature does not work when the Disc Menu appears.
*Use the direction keys to pan across the screen when the zoom factor is 1, 2 or 3.
14.FF and FR
You can search in forward or reverse mode during playback.Press the or keys during playback to search through a disc.
Press the keys again to search at the next speed. Fast Forward Playback and Fast Reverse Playback has four speeds:
× 2, × 4, × 8, × 20.
With each consecutive press of the keys, the search speed increases. If you press the keys five times, FF or FR cycles
back to normal playback.During DVD playback, when FF orFR gets to the beginning of the next title / chapter, it resumes
normal playback; During SVCD or VCD playback with PBC on,when FF or FR
gets to the beginning of the next track, it resumes normal playback.Press PLAY key to resume normal playback.(In FM
status,press FF key or FR key to search for channels. )
15.DISPLAY
In play status ,press DISPLAY key, you can choose a different mode of time display
16.Programe Playback
14