Basic Operational Instruction - VIETA HMD400 User Manual

BASIC INFORMATION ABOUT OPERATION
PREPARATIVE:
1.Before turning on, make sure all connection of this unit and other sound devices are correct and reliable.Plug the power
supply of this unit to the AC Power Socket.
2.Press POWER key on the panel.
3.Press EJECT key to move the tray into the deck,VCD or CD will automatically be played in several seconds.The DVD
with caption directory will enter into the menu status,at this time ,press the direction keys (up,down,left,right)on the
remote control ,move thecursor to the song to be played,and then press PLAY/ENTER key to enter into the playback
status.
Set the picture size(SETUP/SYSTEM SETUP/PROPORTION OF SCREEN PICTURE)
based on the proportion of length,width and height of theTV screen display.
If the machine is keep idle for a long time,the power supply must be unplugged.
1.Power
BASIC OPERATION:
The POWER button on front panel control power supply of whole system.Press STANDBY
key on remote control to switch player to standby mode or power on.
2.
CD RIPPING function
It can converts CD signals into MP3 signals in your USB momory stick when playing cd. Insert the USB
memory ,Press the "RIPPING" key for 3-5seconds on the remote, when monitor appear "copy" letter, select the
song you want to convert and press " ENTER" It is converting and saving into the use disk when the
monitor show the time, No sound output during changes.
CD-RIPPING is an innovating function that allows you to encode one or several tracks from an Audio CD directly on your
USB key. You can then listen to these tracks anywhere you like, without needing a computer.
Explore this function in just a few steps:
- Insert an audio CD in the player. The CD starts playing.
- Insert a USB stick at the front of the device.
- Press the CD RIPPING button on the remote control.
- The CD RIPPING menu appears. Move the cursor on START to begin encoding automatically.
- The information of the CD appears on screen. Press the ENTER button of the remote control to confirm.
- Recording begins. The screen now displays the recording status of the track and the CD.
- The recording takes place at the same time as the playback of the track. You can accelerate the encoding process by
pressing CHANGE SPEED. The recording speed will then be doubled and the playback is stopped.
11