Table of Contents
Advertisement
Installation
Unpacking
All transit bolts and packing must be
removed before using the appliance.
You are advised to keep all transit devices so
that they can be refitted if the machine ever
has to be transported again.
1.
After removing all the packaging,
carefully lay machine on it's back to
remove the polystyrene base from the
bottom.
2.
Remove the power supply cable and the
draining and inlet hose from the hose
holders on the rear of the appliance.
3.
Unscrew the three bolts.
4.
Slide out the relevant plastic spacers.
28
Hide quick links:
Advertisement
Table of Contents
