Replacing The Oven Light; Technical Data; Heating Elements - Zanussi ZOU 332 Instruction Booklet

Technical Data

Dimension of the oven
recess
Height
Width
Depth
Dimensions of the oven
cavity
Height
Width
Depth
Capacity
Oven thermostat regulation: from 50 °C up
to 230 °C

Heating elements

Oven lamp
Top Heating Element
Bottom Heating Element
Top + Bottom Heating Elements 1800 W
Grill Element
Maximum Power absorbed:
Operating Voltage (50 Hz) 230 V - 400 V

Replacing the oven light

Disconnect the appliance from its power
supply point. Push in and unscrew the glass
cap (Fig. 5). Unscrew the light bulb and
replace it with a new heat-proof bulb (300
°C) having the following features: - Operative
tension: 230 V (50 Hz); - Power: 25 W; -
Fitting: E 14. Reconnect the appliance.
This appliance can be connected to
variuos ceramic hobs:
Ceramic hobs
593 mm
Type: ZK 64
560 mm
Maximum power absorbed
550 mm
Type: ZC 6675
Maximum power absorbed
Type: ZC 6685
Maximum power absorbed
Type: ZK 630
335 mm
Maximum power absorbed
405 mm
Type: ZK 640
Maximum power absorbed
410 mm
56 l
Power supply voltage (50 Hz)
Nominal heating power
Oven with ceramic hob
7,625 kW - 8,325 kW - 9,225 kW -
9,425 kW
25 W
800 W
1000 W
- 73/23 - 90/683 (Low Voltage Directive);
- 89/336 (Electromagnetical Compatibility
1650 W
Directive);
- 93/68 (General Directives)
1825 W
and subsequent modifications.
Fig. 5
This appliance complies with the
following E.E.C. Directives:
5,8 kW
5,8 kW
6,5 kW
7,6 kW
7,4 kW
230 V
27