Connections
Connecting a satellite receiver
You can connect a satellite receiver to this recorder to enjoy watching or recording satellite programmes
through the recorder.
By using SCART cable
If both your TV and satellite receiver have a SCART input, use a SCART cable to connect the recorder.
Note
According to the type of the TV set that you are connecting, set the output for the AV1(TV) socket. (
For a satellite receiver
Where to connect:
Normally use the AV2(EXT) socket as above. (Also the AV1(TV) socket, the VHF/UHF RF IN (FROM ANT.) terminal,
or the LINE jacks on the front panel are also available.)
If you connect a satellite receiver to the AV2(EXT) socket, make the following settings:
• "AV2 input" (
page 33)
18
Satellite receiver
SCART cable (not supplied)
To SCART input
TV
SCART cable
(not supplied)
To AV2(EXT)
To AV1(TV)
To aerial input
VHF/UHF aerial
page 32)