Table of Contents
Advertisement
Models in stainless steel or aluminium:
We recommed to clean the oven door using
only a wet sponge and dry it up after cleaning
with a soft cloth.
Never use steel wool, acids or abrasive
products as they can damage the oven
surface.
Clean the oven control panel following the
same precautions.
Oven door cleaning
For a better cleansing of the oven door, you
are suggested to remove it from the appliance
with the following procedure:
-
open tho door completely; lift the small
levers placed on the two hinges and turn
the levers towards the inside (Fig. 6).
-
Slowly close the oven door, until it
touches the two levers,
-
then push it towards the oven and
remove it by pulling it towards the
outside.
-
Place the door on a horizontal level.
After cleaning, assemble the door again
by carrying out the procedure described
above backwards. When the two small
levers are placed again on the hinges, the
door will have been accurately fit.
Replacing the oven light
Disconnect the appliance from its power
supply point. Push in and unscrew the glass
cap (Fig. 7). Unscrew the light bulb and
replace it with a new heat-proof bulb
(300°C) having the following features: -
Operative tension: 230 V (50 Hz); - Power:
15 W; - Fitting: E 14. Reconnect the
appliance.
Fig. 6
FO 0452
Fig. 7
61
Advertisement
Table of Contents
