Engine Operation; Before Starting; Starting - TOHATSU MFS 3.5B Owner's Manual

Tohatsu outboards
Hide thumbs Also See for MFS 3.5B:
Table of Contents

Advertisement

18

ENGINE OPERATION

Before starting

Before starting engine for the first time
1
after reassembling engine or off-season
storage, disconnect stop switch lock
and pull the starter handle completely
2
out approximately 10 times in order to
prime the oil pump.
3

1. Starting

4
!
In case engine starts in gear, do not
start cruising. Stop engine immediately
5
and consult an authorized dealer.
6
Note
The engine will not start unless
7
the switch lock has been properly
connected into the emergency stop
switch.
8
!
9
Do not operate the engine with gear
case out of water.
Severe personal injury, or engine
10
damage will result.
11
12
13
14
�������
�������
Loosen the air vent screw on the
tank cap.
Open the fuel cock.
Fuel cock
Be sure to install the stop switch
l o c k t o t h e s t o p s w i t c h a n d
connect the coil cord to a part of
the operator's body by the hook.
Make sure that the shift lever is in
the Neutral position.
Shift
lever
Choke
knob
�������
!
If the engine starts in gear, do not use
it. Contact an authorized dealer.
Air vent screw
Air vent screw
Stop switch lock
Throttle grip
SLOW
HIGH
Hook

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents