Table of Contents
Advertisement
WTB-BA-e-0913
4
3
Daily operation
3.1
Switching the scale on and off
z000
0FF
. . . . . .
• Set the scale to zero with the a key. The LED above the a symbol lights as confirmation.
z000
r478
To switch the scale on: Check that there is nothing on the weighing pan.
Press the ON/OFF key until the display appears. After the scale has been
switched on, it performs a self-test in which all the segments and then
various items of information about the scale are briefly displayed. When
the weight display appears, the scale is ready to weigh and is
automatically set to zero (the LED above the a symbol is lit).
To switch the scale off: Press the ON/OFF key and hold it down until
"OFF" appears in the display. The display then goes out, and the scale
is switched off.
Energy-saving function and automatic switchoff
For battery operation the scale has an energy-saving function and
an automatic switchoff function which can be both activated and
deactivated in the menu (Chapter 4).
If the energy-saving function is activated (factory setting), when the
scale is powered from the battery it automatically switches into
"Standby" mode after two minutes if no weight change takes place
and no key is pressed. The display is filled with decimal points instead
of digits. As soon as a weight is placed on the pan or a key is pressed,
the scale returns to normal weighing mode.
If the automatic switchoff function is activated (it is deactivated at
the factory), the scale switches off automatically after 15 minutes in
"Standby" mode.
3.2
Simple weighing
• Place the item to be weighed on the pan. The LED above the a
symbol goes off.
• Read off the weighing result. The LED to the right of the weighing
result shows the current weighing unit (the unit can be changed in
the menu, see Chapter 4).
3.3
Weighing with tare
Advertisement
Table of Contents
