Safety Thermostat; The Cooling Fan - Zanussi ZOB 690 User Manual

Table of Contents

Advertisement

10 electrolux
When the required temperature is reached, an
acoustic alarm will sound for a short time and the
thermometer symbol will illuminate permanently.
How to set the temperature and cooking time
It is possible to set the temperature and cooking time
while the the oven is working.
1. Press button
to increase or decrease the pre-set temperature
while the "°" symbol is flashing (Fig. 6). The
maximum temperature is 250°C.
2. Press time function button
" " or " " to increase or decrease the pre-set
cooking time while the symbol

Safety Thermostat

To prevent dangerous overheating (through incorrect
use of the appliance or defective components), the
oven is fitted with a safety thermostat, which interrupts
the power supply. The oven switches back on again
automatically, when the temperature drops. Should
the safety thermostat trigger due to incorrect use of the
appliance, it is enough to remedy the error after the
oven has cooled down; if on the other hand, the
thermostat triggers because of a defective component,
please contact Customer Service.

The cooling fan

The cooling fan is designed to cool the oven and the
control panel. The fan switches on automatically after
a few minutes of cooking. Warm air is blown out
through the aperture near the oven door handle.
When the oven is switched off, the fan may run on
after the oven is switched off to keep the controls
cool. This is quite normal.
The action of the cooling fan will depend on
how long the oven has been used and at
what temperature. It may not switch in at all
at lower temperature settings nor run on
where the oven has only been used for a
short time.
10
and then button " " or " "
and then button
is flashing.
Fig. 6

Advertisement

Table of Contents
loading

Table of Contents