Table of Contents
Advertisement
Installing the modem board
To install the modem board and jack, follow the steps below.
1. Turn the computer upside down.
2. Remove two screws securing the modem socket cover.
3. Lift off the modem socket cover.
4. Connect the modem cable to the modem board.
5. Remove two screws from the modem board socket.
6. Align the connectors and seat the modem board.
7. Secure the modem board with the two screws removed in step 5.
8. Seat the modem socket cover and secure it with two screws.
Installing the battery pack
Refer to Chapter 6 for details on installing the battery pack.
Removing the internal modem
To remove the internal modem.
1. Turn the computer upside down.
2. Remove the battery.
3. Remove two screws securing the modem socket cover.
4. Lift off the modem socket cover.
5. Remove two screws securing the modem board. Store the screws in a
safe place. Be careful not to lose them.
6. Disconnect the modem board and lift it out.
7. Disconnect the modem cable.
8. Seat the modem socket cover and secure it with two screws.
Satellite 1130 Series
Internal Modem Guide
I-2
Advertisement
Table of Contents
