Table of Contents
Advertisement
Region selection
Telecommunication regulations vary from one country/region to another,
so you will need to make sure the internal modem's settings are correct
for the country/region in which it will be used.
1. Point to All Programs, point to TOSHIBA Internal Modem and click
Region Select Utility.
Do not use the Country/Region Select function in the Modem setup utility
in the Control Panel if the function is available. If you change the
Country/Region in the Control Panel, the change may not take effect.
2. The Region Selection icon will appear in the Windows Task Bar.
3. Click the icon with the primary mouse button to display a list of
regions that the modem supports. A sub menu for telephony location
information will also be displayed. A check will appear next to the
currently selected region and telephony location.
4. Select a region from the region menu or a telephony location from the
submenu.
Satellite 1130 Series
The Region Selection icon
When you click a region it becomes the modem's region selection,
and the New Location for telephony will be set automatically.
When you select a telephony location, the corresponding region is
automatically selected and it becomes the modem's current region
setting.
Operating Basics
4-12
Advertisement
Table of Contents
