Table of Contents
Advertisement
Benefits of standby
The standby feature provides the following benefits:
Restores the previous working environment more rapidly than does
hibernation.
Saves power by shutting down the system when the computer
receives no input or hardware access for the duration set by the
System Standby feature.
You can use the panel power off feature.
Executing standby
You can also enable Standby by pressing Fn + F3. See Chapter 5, The
Keyboard, for details.
You can enter standby mode in one of three ways:
1. Click start, click Turn Off Computer and click Stand by.
2. Close the display panel. This feature must be enabled. To enable it,
select the TOSHIBA Power Management Utility icon in the Control
Panel and select the Advanced tab and then set your Power Buttons
options to Standby.
3. Press the power button. This feature must be enabled. To enable it,
select the TOSHIBA Power Management Utility icon in the Control
Panel and select the Advanced tab.
When you turn the power back on, you can continue where you left when
you shut down the computer.
When the computer is shut down in standby mode, the power indicator
blinks amber.
If you are operating the computer on battery power, you can lengthen the
operating time by shutting down in hibernation mode. Standby mode
consumes more power.
Standby limitations
Standby will not function under the following conditions:
Power is turned back on immediately after shutting down.
Memory circuits are exposed to static electricity or electrical noise.
Satellite 1130 Series
Getting Started
3-11
Advertisement
Table of Contents
