Tv Output Signal - Toshiba Satellite 1130 User Manual

USB mouse (optional)
Problem
On-screen pointer
does not respond to
mouse operation
Double- clicking does
not work
The mouse pointer
moves too fast or too
slow
The mouse pointer
moves erratically

TV output signal

Problem
Display on TV is poor
No display
If you turn the computer off in Standby mode while the display is on TV,
the computer will select either the internal LCD or an external computer
CRT as the display device.
Satellite 1130 Series
Procedure
The system might be busy. If the pointer is
shaped as an hourglass, wait for it to resume its
normal shape and try again to move it.
Try changing the double-click speed in the
mouse control utility.
Open the Control Panel, select the Mouse icon
and press Enter.
1. Click the Buttons tab.
2. Set the double-click speed as instructed and
click OK.
Try changing the speed setting in the mouse
control utility.
1. Open the Control Panel, select the Mouse
icon and press Enter.
2. Click the Pointer Options tab.
3. Set the speed as instructed and click OK.
If problems persist, contact your dealer.
The mouse might be dirty. Refer to your mouse
documentations for instructions on cleaning.
If problems persist, contact your dealer.
Procedure
Make sure the TV type is correct for your area:
NTSC (US) or PAL (Europe).
Try adjusting the contrast and brightness
controls on the external monitor.
Press hotkeys Fn + F5 to change the display.
Refer to Chapter 5, The Keyboard.
If problems persist, contact your dealer.
Troubleshooting
8-14