Disconnecting LAN cable
To disconnect the LAN cable, follow the steps below.
1. Pinch the lever on the connector in the computer's LAN jack and pull
out the connector.
2. Disconnect the cable from the LAN hub in the same manner. Check
with your LAN administrator before disconnecting from the hub.
Wireless LAN
The wireless LAN is compatible with other LAN systems based on Direct
Sequence Spread Spectrum radio technology that complies with IEEE
802.11 wireless LAN standard (Revision B). It supports the following
features:
This is a Certification Mark of the Wi-Fi Alliance.
Automatic Transmit Rate Select mechanism in the transmit range of
11, 5.5, 2 and 1 Mbit/s.
Frequency Channel Selection (2.4 GHz)
Roaming over multiple channels
Card Power Management
Wired Equivalent Privacy (WEP) data encryption, based on the 128 bit
RC4 encryption algorithm as defined in the IEEE 802.11 standard on
wireless LANs.
Wake-up on LAN does not function on a wireless LAN.
Satellite 1130 Series
Operating Basics
4-16