Specifications - Toshiba L830 User Manual

Flashing amber
Amber
White
No light
If the battery pack becomes too hot while it is being charged, the charge
will stop and the DC IN/Battery indicator will go out. When the battery
pack's temperature falls to a normal range, charging will resume - this
process will occur regardless of whether the computer's power is on or off.
Power indicator
Check the Power indicator to determine the power status of the computer -
the following indicator conditions should be noted:
White
Flashing white
No light

Specifications

This section summarizes the computer's technical specifications.
Physical Dimensions
Physical Dimensions shown below do not include parts that extend beyond
the main body.
L830
User's Manual
The battery charge is low. The AC adaptor
must be connected in order to recharge the
battery.
Indicates a problem with the power supply.
You should initially try plugging the AC
adaptor into another power outlet - if it still
does not operate properly, you should
contact your reseller or dealer.
Indicates the AC adaptor is connected and the
battery is charging.
Indicates the AC adaptor is connected and the
battery is fully charged.
Under any other conditions, the indicator does
not light.
Indicates power is being supplied to the
computer and the computer is turned on.
Indicates that the computer is in Sleep Mode and
that there is sufficient power available (AC
adaptor or battery) to maintain this condition. In
Sleep Mode, this indicator will turn on for one
second and off for two seconds.
Under any other conditions, the indicator does
not light.
329 (w) x 221 (d) x 27/31 (h) millimeters
3-14