Toshiba L830 User Manual page 114

USB
Legacy USB Support
Use this option to enable or disable USB Legacy Emulation. If your
operating system does not support USB, you can still use a USB mouse
and keyboard by setting the Legacy USB Support item to enabled.
Enabled
Disabled
Internal USB 3.0 controller
Use this option to enable or disable the internal USB 3.0 controller. If
Disabled is selected, the internal USB 3.0 port(s) on the computer will
work as USB 2.0 port(s), which will save power.
Enabled
Disabled
SATA
This tab allows you to set conditions for SATA.
SATA Interface setting
This feature allows you to set SATA interface setting.
Performance
Battery life
LAN
Wake-up on LAN
This feature lets the computer's power be turned on from shutdown when it
receives a wake-up packet (Magic packet) from the LAN.
Power will be automatically turned on when a signal is received from an
administrator's computer which is connected via a network.
The following settings can be changed when the Built-in LAN is Enabled.
User's Manual
The Wake-up on LAN function consumes power even when the
system is off. Leave the AC adaptor connected while using this
feature.
Regarding Wake-up on LAN from sleep or hibernation, you must
check the "Allow the device to wake the computer" check box within
the LAN Device properties. (This feature does not effect the Wake-up
on LAN from sleep or hibernation.)
Enables the USB Legacy Emulation.
Disables the USB Legacy Emulation.
Enables the internal USB 3.0 controller.
Disables the internal USB 3.0 controller.
Let HDD/SSD work with maximum performance.
Let HDD/SSD work with battery life mode. If this
setting is selected, this caused performance
down.
5-13