Note: To dial from your Phone Book using the Web Configuration Tool, access the tool's Phone
Book page (see Accessing the Web Configuration Tool on page 9).
Dial by Call Logs Entry
1. Press Settings
2. Press OK, and then press Next or Prev to navigate to the desired log type (Missed Calls,
Answered Calls, or Outgoing Calls).
3. Press OK. The number of calls appears.
4. Press
(UP) and
5. Do one of the following:
•
Press Dial to call this log entry. The log is dialed and the phone returns to the default
display.
•
Press Detail to see calling name and time details.
•
Press Delete to delete the current log entry.
Redial
1. Lift the handset (optional).
2. Press
(REDIAL).
Note: Your phone will not remember the last-dialed number if power is lost.
Answering Calls
Incoming calls ring Line 1, if all lines are free, or the next available line. If all lines are busy and
Call Forward – Busy is not enabled (see Enable/Disable Call Forward on page18), callers hear a
busy signal.
When the phone rings, the Ring/Message Indicator and the associated Line key flash, and the
name of the caller appears.
Answer a Call
To answer a call, do one of the following:
•
In handset mode, lift the handset.
•
In headset mode, press the Headset key, then press the flashing Line key.
•
In handsfree mode, press
For more information about handset, handsfree (Speaker), or headset calls, see Handset,
Handsfree and Headset Modes on page 22.
Auto Answer
You can use Auto Answer to automatically answer incoming calls in handsfree or headset mode.
To enable or disable Auto Answer:
•
Access the Feature Configuration page of the Web Configuration tool (see Accessing the
Web Configuration Tool on page 9).
5330/5340 IP Phone SIP User and Administrator Guide
, and then press >> until CALL LOGS? appears.
(DOWN) to navigate through the logged call entries.
(SPEAKER).
15