Zanussi ZHM 761 Operating Instructions Manual page 5

THERMOSTAT CONTROL KNOB (FIG. 2)
Turn the thermostat control knob clockwise to select
temperatures between 50 C and 250 C (MAX).
OVEN CONTROL LIGHT
This yellow light will come on when the oven function
control knob is set on a function.
THERMOSTAT CONTROL LIGHT
Once the oven temperature has been selected, the
Themostat Control Light will come on and remain on
until the oven has reached the correct setting; after that,
it will go on and off with the thermostat, showing how the
temperature is being maintained.
THE SAFETY THERMOSTAT
This oven is provided with a safety thermostat. In case
of malfunctioning of the main thermostat, and consequent
over-heating, the safety device will stop the power
supply to the appliance. If this happens, call your local
Zanussi Service Centre. Under no circumstances should
you attempt to repair the appliance yourself.
THE COOLING FAN FOR THE CONTROLS
This oven is provided with a cooling fan, meant to keep
the front panel, the knobs and the oven door handle
cool. This fan may run on after the oven or grill is
switched off, until a normal temperature is reached.
CATALYTIC SELF-CLEANING
SIDE PANELS
(accessory available on request)
Catalytic self cleaning panels can be installed onto the
sides of the oven. These panels, at normal cooking
temperature, can turn the splashes of fat into a light
residual powder.
This powder must be removed with a damp sponge after
the oven has cooled down, in order to keep the catalytic
panels in good condition.
HOTPLATE CONTROL KNOBS
The Control Knobs for the hotplates (Fig. 3) can be found
on the Oven Control Panel.
The energy regulator of the hotplates can be set by
means of a 7 positions control knob.
0 = OFF
1 = MINIMUM
3 = MAXIMUM
The intermediate positions give an increasing heating
power.
Carefully supervise cookings with fats or oil, since
these types of foodstuff can result in a fire, when over-
heated.
56
FO 0282
Fig. 2
FO 2168
Fig. 3
0