If Something Goes Wrong; Assistance And Spare Parts - Zanussi ZHM 761 Operating Instructions Manual

WHAT HAPPENS IF SOMETHING GOES WRONG
If the appliance is not working correctly, please carry out the following checks, before contacting your local
Zanussi Service Centre.
SYMPTOM
The oven does not come on
The oven temperature light does not come on
The oven light does not come on
It takes too much time to finish the dishes, or they are
cooked too fast.
Steam and condensation settle on the food and the
oven cavity.
TECHNICAL ASSISTANCE AND SPARE PARTS
If after the checks listed in the
previous chapter, the appliance
still does not work correctly,
contact your locals Zanussi
Service Centre, specifying the
type of malfunctioning, the
appliance model (Mod.), the
product number (Prod. No.) and
the serial number (Ser. No.)
marked on the identification plate.
This plate is placed on the front
external edge of the oven cavity.
64
SOLUTION
Check the oven is in manual operation and that both a
cooking function and a temperature have been selected
or
Check the appliance is wired in properly, and the socket
switch or the switch from the mains supply to the oven are
ON.
Turn the thermostat knob on a temperature
or
Turn the oven function control knob on a function.
Turn the oven function control knob on a function
or
Buy a new oven light bulb, asking for it to your local Zanussi
Service Centre and replace it by following the instruction
provided in this booklet.
Refer to the contents of this booklet, especially to the
chapter "Using the Oven".
Leave dishes inside the oven no longer than 15-20 minutes
after the cooking is completed.
Mod.
PROD. NO.
SER. NO.
MOD. TYPE
PROD. NO.
SER. NO.
Original spareparts,
certified by the product
manufacturer and
carrying this symbol are
only available at our
Service Centre and
authorized spareparts
shops.