Operation/Diagnostics - Golden Technologies Compass Sport GP605 SS Owner's Manual

Compass Sport Owner's Manual – Model # GP605 SS, GP605 CC

OPERATION/DIAGNOSTICS

For Compass Sport Units with the SHARK Controller
Flash codes indicate the nature of an abnormal condition directly from the
SHARK LED. Without the use of any servicing tools, the condition can be simply
diagnosed.
Flash Description
Code
1 User Fault
2 Battery Fault
3 Left Motor Fault
4 Right motor fault
5 Left park brake fault
6 Right park brake fault
7 SHARK Control Unit Fault Check the SHARK Communications Bus con-
8 SHARK Power Module
Fault
9 SHARK Communications
Fault
10 Unknown Fault
The SHARK modules are not user serviceable. Do not attempt to repair Shark
modules.
Note that joystick OONAPU (Out Of Neutral At Power Up) is not a fault. Simply by
removing your hand from the joystick and allowing it to return to the neutral position,
the fault will immediately clear. If the condition persists after removing your hand, the
joystick may be damaged. Consult a Service agent.
Possible stall timeout or user error. Release
the joystick to neutral and try again.
Check the batteries and cabling. Try charging
the batteries. Batteries may require replacing.
Check the left motor, connections and
cabling.
Check the right motor, connections and
cabling.
Check the left park brake, connections and
cabling.
Check the right park brake, connections and
cabling.
nections and wiring. Replace the Control Unit
Check SHARK connections and wiring.
Replace the Power Module.
Check SHARK connections and wiring.
Replace the SHARK Control Unit.
Check all connections and wiring. Consult a
service agent.
25
Revised 11/12/10