Compass Sport Owner's Manual – Model # GP605 SS, GP605 CC
ASSEMBLY / DISASSEMBLY
JOYSTICK INSTALLATION
1. Position the joystick on the joystick bracket. Match the holes in the joystick with the
holes in the bracket. See figure 5.
2. Insert the 4 Allen-head screws with lock washers through the bracket and into the
holes in the joystick.
3. Use an Allen wrench to tighten the screws.
4. Connect the joystick cable to the controller cable. See figure 6.
5. Use the provided Velcro tie-wraps and under arm clip to secure the controller
cable to the armrest bracket.
6. To disassemble, turn off joystick controller and then reverse the process above.
Allen-head screws
Figure 5
Joystick Cable
Figure 6
14
Revised 11/12/10
Joystick Bracket