Recording; To Record; Disarm Track Record; To Set Punch In/Out From Current Selection - Tascam FW-1884 Notes

Digital Performer (Macintosh): Recording

Recording

The DP record functions that the FW-1884 can con-
trol are recording, punch recording, and automation
recording.

To Record

1 Arm a track by holding the
EQ Encoders) and pressing the
desired track.
2 Move the Now time to where you want to start
recording.

Disarm Track Record.

• All armed tracks can be disarmed by pressing the
key.
ALL SAFE/F3
or
• by holding and pressing the
SHIFT

To Set Punch In/Out from current Selection

1 Move the Now time to the desired start point.
2 Hold and press the
SET

To Toggle AutoPunch Mode

• Hold and press the
SHIFT

To Perform Record Automation

• Hold the key and press a track
WRT
arm that track for automation recording.
Automation writing is determined by the Touch-
Write function of DP while the transport is
rolling.

To Change Automation Touch Mode

1 Arm the track for Write Automation.
2 Hold and press the track's
TCH

To Change Automation Latch and Overwrite Mode

1 Arm the track for Write Automation.
2 Hold and press the track's
LATCH
8
TASCAM FW-1884
key (above the
REC
key on the
SEL
key.
REC
key.
IN
key.
IN
key to
SEL
key.
SEL
key.
SEL
3 Press the transport
REC
ing. Alternatively, you can use the footswitch.
4 Press the key to stop recording, or click
STOP
the footswitch again.
3 Move the Now time to the desired end point.
4 Hold and press the
SET
• Press the key to stop automation
STOP
recording.
Hold and press
SHIFT
automation tracks.
The track's on-screen automation mode will tog-
gle between Touch and Trim Touch modes.
The track's on-screen automation mode will tog-
gle between the Latch, TrimLatch, and Over-
write mode.
ord key to start record-
key.
OUT
to disable all record
WRT