To Shuttle Forward Or Back; To Set A New Marker; To Set Memory Cycle In And Out Times; Toggle Memory Cycle On/Off - Tascam FW-1884 Notes

To Shuttle Forward or Back

• With the key on, turn the data wheel
SHTL
clockwise to shuttle forward, or counter-clock-
wise to shuttle backward.

To Set a New Marker

1 Move the Now time to the place where you want
to set a marker.
2 Press the
MARKER/F5

To Set Memory Cycle In and Out Times

1 Move the Now time to the desired start point.
2 Hold and
SHIFT SET

Toggle Memory Cycle On/Off

• Hold and press the
SHIFT

To Nudge the selection

1 Select an audio event.

To Solo or Unsolo a Track

• Press the key of the track you want to
SOLO
solo or unsolo.

To Un-solo All Tracks in a Project

• Press the
CLR SOLO/F4

To Mute or Unmute a Track

• Press the key of the track you want to
MUTE
mute or unmute.

To Unmute All Tracks in a Project

• Hold and press the
SHIFT
Digital Performer (Macintosh): Playback
key
and press the key.
IN
key.
OUT
key
key.
CLR SOLO/F4
Continue turning in a given direction to increase
the shuttle speed.
or
Hold and press m
SET
,.
LOCATE
3 Move the Now time to the desired end point.
4 Hold SHIFT and SET and press the OUT key.
2 Press the g
NUDGE
TASCAM FW-1884
or
LOCATE
or t key.
NUDGE
7