Fw-1884 Control Listings; Modifier Keys; Surface Keys And Knobs - Tascam FW-1884 Notes

Digital Performer (Macintosh): FW-1884 Control Listings

FW-1884 Control Listings

Modifier Keys

There are five primary modifier keys on the FW-1884.
They are used to provide additional functionality with
the FW-1884 control surface keys and knobs. They are
also used to send virtual key modifiers to DP in order
to access additional features which might normally
require a keyboard.

Surface Keys and Knobs

KEY ACTION
SHIFT Key & Control Modifier
CTRL Key & Control Modifier
(no surface modifications)
CMD
SET Transport CTRL Modifier
The following table lists the keys and knobs on the
FW-1884 and what they are used for. The normal
mode of operation (no modifier keys) is indicated with
a "-"in the Modifier column.
KEY/KNOB MODIFIER
FLIP -
PAN -
-
AUX 1-4
(held down)
CONTROL PANEL -
-
SAVE/F1
REVERT/F2 -
ALL SAFE/F3 -
-
CLR SOLO/F4
SHIFT
-
MARKER/F5
LOOP/F6 -
CUT -
-
DELETE
-
COPY
PASTE -
UNDO
SHIFT
12
TASCAM FW-1884
NOTES
DP virtual SHIFT Key
DP virtual CTRL Key
DP virtual Command key
Used when setting values (e.g. marker, punch in/out)
In some cases what has been silkscreened on the FW-
1884 differs from the functionality in DP. For those
controls the original silkscreened name appears in
parenthesis.
ACTION
Toggles Encoder/Fader mapping
ENCODER knob adjusts Track pan
ENCODER knob adjusts Track Aux send level
MUTE - toggles send mute
Opens the FW-1884 Control Panel
Save current project
N/A
Disable Record on all channels
Unsolo all tracks
Unmute all tracks
Drop Marker at current time ((Also dropped using SET and LOCATE >>)
Toggles Memory Cycle on/off
Cut the current selection
Delete current selection
Copy current selection
Paste previously copied selection
Undo
Redo