Recording With Cubase Le; Input Setting - Tascam US-144 Owner's Manual

6 – Recording with Cubase LE
This chapter explains the basics you will
need to understand when using the US-144
with Cubase LE.
This discussion is not intended to replace

Input setting

1�
Start up Cubase LE. From the
Devices menu, choose Device Setup.
The Device Setup window will
appear.
2�
From the device list in the left side of
the Device Setup window, choose VST
Multitrac.
3�
In the right side of the window, click
the Setup tab, specify the ASIO Driver
for the interface that uses an ASIO
driver, and click the Apply button.
If you have connected the digital
input, set the Clock Source to exter-
nal.
1
TASCAM US-144
the user manual of your software.
If you have questions specific to Cubase
LE, please refer to the Cubase LE user
manual.
4�
From the Devices menu, choose VST
Inputs to access the VST Inputs win-
dow. Verify that the Port field shows
the input name of the audio interface
you are using, and that the Active
indicator is lit.