Time Setting; Day Setting - Seiko V14J Instructions Manual

TIME SETTING

Pull out the crown Turn the crown to set
t o t h e s e c o n d the time.
c l i c k w h e n t h e
I n o r d e r t o s e t t h e t i m e
s e c o n d h a n d i s
accurately, turn the minute
hand  to  minutes ahead
at the 12 o'clock
and the n r e tur n i t to the
position.
correct time.
Note For models with a screw lock type crown, always screw the crown in again
after the setting.


DAY SETTING

The day hand cannot be adjusted independently of the other hands.
Before setting the time, set the day by turning the hour and minute hands.
Push the crown back in
to its normal position
u
simultaneously with a
time signal.
u
u
u
Pull out the crown all the way to the second click.
Turn the crown clockwise to advance the hour and minute hands.
When the hour and minute hands turn past the 12 o'clock marker, the day hand
starts moving.
Keep advancing the hour and minute hands until the day hand is set to the
next.
To advance the day hand quickly, turn back the hour and minute hands  to 
hours after the day changes to the next, and then advance them again until the
day hand is set to the next.
Repeat the procedure above until the day hand is set to the desired day.
After setting the day, set the time. When setting the hour hand, check that the
2-hour hand is correctly set.