Manual Time Zone Setting (To Set The Watch To The Local Time Of The Destination In An Airplane, Etc.) - Seiko Astron GPS SBXA038-1 Basic Manual

Table of Contents

Advertisement

3
BASIC OPERATION
In-fl  ight mode (
 In-fl  ight mode  ( )
Set to the in-fl  ight mode( )where the reception may infl  uence 
operation of other electronics devices in an airplane, etc.
In  the  in-fl  ight  mode(
)the  GPS  signal  reception  (time  zone 
adjustment,  manual  time  adjustment,  and  automatic  time 
adjustment) does not work.
 Set to the in-fl  ight mode( )
※   W hen 5 seconds or longer have elapsed after operation of ① , the watch automatically returns to the time display mode.  When 
the watch returned to the time display mode, restart operation from ① .
Press  Button  B  and  then 
Continue to press Button C (3 sec) within 
1
2
release it.
approximately 5 sec after operation of ① .
The  second  hand  indicates  the 
The second hand stops at the 40-sec position, and the 
reception  result  (Y  or  N),  and  the 
indicator hand points to   
indicator hand points to the type of 
reception (1 or 4+).
< In-fl  ight mode( )state >
Press
The indicator hand 
and
Release
points to 
 Reset the in-fl  ight mode( )
Carry out operation of ① to ③ .
In ②, when the indicator hand points to  ● ON  in 
the figure at the right, the in-flight mode ( ) can be 
reset.
) (When boarding)
< In-fl  ight mode( )>
The indicator hand points 
to 
※   W hen  the  in-flight  mode
( )is reset,  the indicator 
hand indicates the charging 
status.
3
In-fl  ight mode
automatically ends after 5 sec
The  watch  returns  to  the  time 
display mode.
When the in-fl  ight mode(
is brought about, the indicator 
.
hand points to 
the watch has returned to the 
time display mode.
→   M anual time zone setting (To set the 
Press
w a t c h   t o   t h e   l o c a l   t i m e   o f   t h e 
for
destination in an airplane, etc.)
3 sec
  P.43
42
3
BASIC OPERATION
Manual time zone setting (To set the watch to the local time of the destination in an airplane, etc.)
 Manual time zone setting
In places where the time zone cannot be adjusted, the time zone can be set manually.
※ Refer to  Set Daylight Saving Time (DST) P.41,  to set Daylight Saving Time (DST).
 How to manually set the time zone 
C o n t i n u e   t o   p r e s s 
1
Button  C  (3  sec),  and 
when the second hand 
has stopped, release it.
( )
 setting 
The  second  hand  moves 
to  display  the  currently 
set time zone.
 even after 
Press
3 sec
※   I f  the  time  for  pressing  is 
short, the watch will enter 
operation  for  checking 
the  time  zone  setting,  so 
make certain to press the 
button for 3 sec. 
※ If the second hand is stopped for one minute or longer, the watch will automatically return to the time display mode.
Press Button B or Button C to adjust the second hand 
2
to the time zone of the destination
When  the  button  is  pressed  once, 
<Display of the indicator hand>
the  second  hand  moves  to  the 
Displays  ON/OFF  setting  of 
next zone.
Daylight Saving Time (DST).
DST
clock
wise
Display
counter
for
clock
wise
※   I f  Daylight  Saving  Time 
( D S T )   i s   n o t   c o r r e c t , 
change  over  ON/OFF  with 
reference  to  Set  Daylight 
Saving  Time  (DST) 
after operation of ③ .
43
When the hour and 
3
minute hands stop 
moving, press Button A
The second hand starts 
moving.
※   D uring  movement  of  the 
date, the buttons and crown 
ON
OFF
cannot be operated. 
Press
P.11
   

Advertisement

Table of Contents
loading

Table of Contents