Time Setting And Hand Position Adjustment - Seiko SSC642P Instruction Manual

• When the display mode is switched, the function of the hands will change accordingly.
• Before switching the display mode from the STOPWATCH mode to the POWER RESERVE
DISPLAY mode, make sure that the stopwatch has been reset.
• While the stopwatch is counting, button B is used for "SPLIT," "SPLIT RELEASE," or "RESET"
functions.
• After the stopwatch is reset, the display mode will automatically change to the POWER
RESERVE DISPLAY mode in one minute.
10
TIME SETTING AND HAND POSITION
ADJUSTMENT
◆ This watch is designed so that the following adjustments are made with the
crown at the second click position.
1) Time settings for main dial
2) Hand position adjustment for stopwatch minute and 1/5-second hands
STOPWATCH 1/5-second hand
Main dial
Power reserve indicator
(STOPWATCH minute hand)
Second click
When any hand requires a
position adjustment, complete
the hand position adjustment
procedure first, and then move
on to the time setting procedure.
11