Stand And Wall-Mounting Instructions (Optional) - Kogan KALED40XXXZA User Manual

Stand and wall- mounting instructions (optional)
How to assemble the stand
If you need to remove or assemble the stand please read the following instructions.
- Before attaching/detaching the stand, make sure to turn off the TV.
- Before performing work, spread cushioning over the base area to lay the LED TV on.
This will prevent it from being damaged.
1) Fix the bracket and the Transition board on the stand with four screws.(figure 1)
2) Put the television on the table, fix the stand and the unit with four screws given in the
carton.(figure 2)
B-ST4*30
Screws
(4 x B-ST4*30)
Transition board
Stand
Bracket
Figure 1
Screws
(4 x M4*10)
8
Figure 2
M4* 10