Table of Contents
Advertisement
Stand and wall-mounting instructions (optional)
How to assemble the stand
If you need to remove or assemble the stand please
read the following instructions.
-Before attaching/detaching the stand, make sure to
turn off the TV.
-Before performing work, spread cushioning over the
base area to lay the LED TV on.
This will prevent it from being damaged.
Assembling instruction:
1) Fix the stand and the unit together with 5 screws.
2) To remove the stand, reverse instructions as above.
Securing the TV Stand
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular,
ensure your children do not hang over or destabilize the TV; doing so may cause the TV
to tip over, causing serious injuries or death. Follow all safety precautions
this manual.
For added stability, install the anti-fall device for safety purposes,
as follows.
ALTERNATIVELY
To secure the TV to the wall:
1- Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the
screws have been firmly installed onto the wall.
- You may need additional material such as an anchor depending on the type of wall.
- Since the necessary clamps, screws, and string are not supplied, please purchase them
separately.
2 - Remove the screws from the centre back of the TV, put the screws into the clamps,
and then fasten the screws onto the TV again.
- Screws may not be supplied with the product. In this case, please purchase the screws
of the following specifications.
- Screw Specifications for a 46 ~ 55 Inch LED TV: M8 X L10
Screws(5-M4X10)
8
at the start of
Advertisement
Table of Contents
