Menu Operation - Kogan KALED40XXXZA User Manual

Basic Operation

Menu operation

1
Input Setup
Press INPUT key on the remote control to enter "INPUT
SOURCE" menu. Use ▲/ key to move the cursor to the input
you desired and press OK key to confirm.
2
Channels Selection
There are four ways to select channel:
1) Using number keys, and OK keys on the remote control to
select channel directly. To select channel 90, press
When you use the number buttons, you can directly
select channels that were either erased or not memorized.
2) Using PROG/ key on the remote control or on your TV to select channel.
When you press the PROG/ key, the TV changes channels in sequence. You will
see all the channels that the TV has memorized.
You will not see channels that were either erased or not memorized.
3) Press RECALL key to return to previous channel, press it again to return to current
channel.
To quickly switch between two channels that are far apart, tune to one channel, then use the
number keys to select the second channel. Then use the RECALL button to quickly
alternate between them.
RECALL is not activated if no channel has been changed after TV turning on.
4) Select channels from "Channel List" or "Favorite Channels List".
Press OK key to select Channel.
3
Volume Adjustment and Mute Setup
Volume adjustment
Press VOL/ key on the remote control or on the TV to display "Volume" menu,
adjust the volume of TV between 0 to 100 by using VOL/ key:
·To increase the volume, press VOL key;
·To decrease the volume, press VOL key;
Mute
Press MUTE and the sound cuts off. The MUTE icon will appear in the lower-left corner
of the screen.
To resume sound, press the MUTE button again, or simply press the VOL  key.
9 0
25
Input Source
DTV
ATV
AV
Component
PC-RGB
HDMI1
HDMI2
HDMI3
USB1
USB2
.
OK
Select
OK