Kogan KALED32DVDZD Quick Start Manual

Note: Please place the TV screen face down on a SOFT surface such as a blanket or towelling to avoid scratching the
screen. Use the recommended screw size for installation of wall mounts to avoid damaging the television.
1. Fix the bracket and the stand with the screws as shown in Figure 1.
2. Put the television on the table, fix the stand and the unit with screws as shown in Figure 2.
To disconnect the stand from the TV, simply perform the above steps in reverse order.
The first time you power on the TV, the "First Time Setup" will be shown on the TV screen. Please follow the procedures
below to do the first installation, including channel searching.
▲ ▼
Press / to select the desired menu item.
•
◀ ▶
Press / to select the language to be used in menus and messages.
•
◀ ▶
Press / to select mode.
•
◀ ▶
Press / to select the country you are currently in.
•
◀ ▶
Press / to select the mode: DTV+ATV, DTV, ATV
•
◀ ▶
Press / to update the channel.
When first tuning digital TV, press the MENU button to skip digital tuning. When tuning analogue, press MENU to skip
the analogue tuning.