Surround Sound; Auto Volume; Spdif Mode - Kogan KALED40XXXZA User Manual

Menu system instruction
Sound

Surround Sound

This is used to turn on surround sound to gain better sound effect.
1. Press / key to select "Surround sound" option.
2. Press / key to select "Surround" or "Off".
HDMI Sound
This option is only used in HDMI mode.
1. Press / key to select "HDMI Sound" option.
2. Press / key to select HDMI Sound mode, HDMI or Component.

Auto Volume

Each broadcasting station has its own signal conditions, and it is inconvenient to adjust
the volume every time the channel is changed. "Auto Volume" automatically adjusts the
volume of the desired channel by lowering the sound output when the modulation signal
is high or by raising the sound output when the modulation signal is low.
1. Press / key to select "Auto Volume" option.
2. Press / key to select "On" or "Off".

SPDIF Mode

This is used to select "SPDIF Mode" .This option is only used in HDMI/DTV mode.
1. Press / key to select "SPDIF Mode" option.
2. Press / key to select "RAW" or "PCM".
User settings for SOUND(Equalizer)
1. Press ▲/▼ key to select an equalizer item.
2. Press OK or  key to enter the equalizer
submenu .
The sound settings can be adjusted to suit your
user preferences.
1. Press ▲/▼ key to select a particular item.
2. Press / key to decrease or increase the
value of a particular item.
Note: The adjusted values are stored according
to the selected particular item.
30
SPDIF Mode
Equalizer
环绕声 Equalizer Adjust 关
HDMI 声音 HDMI
120Hz
自动音量控制 关
500Hz
超重低音 1.5KHz 关
3KHz
丽音 立体声
7.5KHz
Select Menu:Return
PCM
50
50
50
50
50