Table of Contents
Advertisement
Product Preparation
If you need to remove or assemble the stand, please read the following:
•
Before attaching/detaching the stand, be sure to turn the TV off.
•
Before performing any work, spread cushioning out over the base area to
lay the TV on. This will prevent it from being damaged.
Do not apply any pressure to the screen display area, which may compromise
the integrity of the display. The Kogan warranty does not cover user abuse or
other damage caused by improper installations.
Stand Assembly
1. Place the TV unit face down on a soft, flat
surface (blanket, foam, cloth etc..) to
prevent any damage to the screen.
2. Attach the stand to the bottom of the TV
using the four MB4 x 22mm screws.
Wall Mounting Instructions
We suggest that the TV is mounted with at least 6cm gap to the wall to prevent
cable interference. Before mounting the TV to the wall, the stand must be
removed (if it is in place).
To attach the wall mount to the TV:
1. Remove the TV stand screws.
2. Remove the stand from the TV.
3. Secure the wall mount bracket to the back of
the TV using four large screws. Follow the
installation instructions of the TV mount itself.
NOTES
•
The wall mount bracket is not included with the TV.
•
Please confirm that your wall has the strength to withstand the weight of
the TV.
•
Be careful not to scratch the panel and TV cabinet when you fasten the
screws to the TV.
6
MB4 x 22mm
(4 pcs)
Hide quick links:
Advertisement
Table of Contents
