Picture Settings; Sound Settings - Kogan 6 EH6300 Series User Manual

PICTURE SETTINGS

To access Picture settings, press the MENU button and go to picture.
Picture Mode
Select the preset picture mode. You can also switch the mode via PMODE button on the remote control.
You can only customise the contrast, color, brightness and tint in Personal mode.
Contrast
Adiusts the difference between the light and dark areas of the picture. To get better picture value, Contrast
should be adjusted to the proper value.
Brightness
Adjusts the brightness of the picture, and usually is adjusted together with Contrast.
Colour
Adjust the saturation of the color based on your own like.
Tint
Adjust the tint of TV display.
Sharpness
Adjusts the sharpness of the picture. This function is not available in PC mode.
Colour Temp
Press OK button to enter the color temperature sub menu. Color Temperature Adjusts the colour
temperature of the picture, to select the option: Cold, Normal, Warm.
Noise Reduction
To filter out and reduces the image noise and improve picture quality.
HDMI Mode
Select HDMI Mode to Auto,Video and PC.

SOUND SETTINGS

To access Sound settings, press the MENU button and go to sound.
Sound Mode
Select the preset Sound Mode. You can also switch the mode via SMODE button on the remote control
Standard, Music, Movie, Sport and Personal five kinds of voice mode for your chioce. Bass and Treble can
only be adjusted when Sound mode is set to Personal.
Treble
Adjuststhe highest part o he sound
Bass
Adjuststhe lowest part o he sound.
Balance
Adjusts how much audio ( loudness ) gets sent to the le and right speakers.
Auto Volume Level
This function may be set as On or Off. Auto Volume Level can set the volume automatically adjust
corresponding to the input audio.
SPDIF Mode
Select three modes area available including Auto, PCM and Off.
AD Switch
Enter the AD Switch sub-menu, then select this option to adjust AD volume.
NOTE:
Balance: This item can adjust the speaker's output, it enables you to listen to best at your position.
Auto volume level: This item uses for reducing the difference between channel and program's volume
automatically. It made the overall water to be even. This function will also reduce the fluctuation of the
sound.