Key To Symbols; Symbols On The Machine; Symbols In The Operator's Manual - Husqvarna K960 Ring Operator's Manual

Symbols on the machine:

WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Please read the operator's manual
carefully and make sure you understand
the instructions before using the machine.
Always wear:
• Protective helmet
• Hearing protection
• Protective goggles or a visor
• Breathing mask
WARNING! Dust forms when cutting, this
can cause injuries if inhaled. Use an
approved breathing mask. Avoid inhaling
petrol fumes and exhaust fumes. Always
provide for good ventilation.
WARNING! Kickbacks can be sudden,
rapid and violent and can cause life
threatening injuries. Read and understand
the instructions in the manual before using
the machine.
WARNING! Sparks from the cutting blade
can cause fire in combustible materials
such as: petrol (gas), wood, dry grass etc.
2 –
English

KEY TO SYMBOLS

Symbols in the operator's manual:

Switch off the engine by moving the stop
switch to the STOP position before carrying
out any checks or maintenance.
Run position.
Stop, with the return spring to the operating
position.
Stop, in the fixed position.
Always wear approved protective gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be worn.
Other symbols/decals on the machine
refer to special certification requirements for certain
markets.