Replacing The Drive Wheel; Replacing The Support Rollers/Guide Rollers; Water Hose - Husqvarna K960 Ring Operator's Manual

Replacing the drive wheel

1 Lock the axle using the locking button.
2 Loosen the centre screw and remove the washer.
3 You can now lift off the drive wheel.
CAUTION! Replace the drive wheel when fitting a new blade.
A worn drive wheel can result in the blade slipping and
becoming damaged.
Inadequate water flow drastically shortens the life of the drive
wheel.
Replacing the support rollers/guide
rollers
• Remove the support roller cover.
• Check the rollers for wear.
• Use a 19 mm fixed spanner and a 13 mm combination
spanner to replace the rollers.
• Lubricate using bearing grease inside the rollers before
the new rollers are fitted.
16 –
English
SETTINGS AND ADJUSTMENTS
• Replace the guide rollers when half of the flange on the
rollers is worn.
A) New
B) Worn
• Replace the support rollers when the roller surface is flat,
(or) when the groove on the roller surface has worn away.
A) New
B) Worn

Water hose

Connect the water hose to the water supply. The water flow is
activated by opening the check valve. Minimum water flow: 4
l/min Note that the machine's hose nipple is fitted with a filter.