Operation; Headset Operation; Making A Call - AT&T TL 7610 User Manual

Operation

Headset operation

Making a call

Using the headset base as a stand-alone product
(installation option 2):
• In order to make calls, you need to have a telephone which is
already plugged into the same telephone line.
When the headset base is plugged into the telephone wall
jack (installation option 1 or 2):
You must select NO LIFTER MODE on the headset base (see page 11).
1. Follow the instructions in your telephone user's manual for
making calls.
2. Press ON/
3. After you join the call on the headset, you can hang up the
telephone and continue the call on the headset.
When the headset base is connected to a multiple line or
digital business corded telephone (installation option 3):
You must select LIFTER MODE on the headset base (see page 11).
1. Lift the corded handset from the telephone cradle.
2. Follow the instructions in your telephone user's manual for
making calls.
3. Press ON/
OFF
4. The handset must be out of the cradle (not hung up) until you are
ready to end your call.
on the headset at any time to join the call.
OFF
on the headset at any time to switch to the headset.
29