Headlight Switch; Stater Button - KYMCO Mongoose 90 Owner's Manual

Headlight switch

The headlight switch should be operated when
you add the headlight equipment (using genuine
KYMCO accessories).
Turning the switch to the "
switch off the headlight.
Turning the switch to the "
on the low beam.
Turning the switch to the "
on the high beam.
NOTE:
．
The USA model does not come equipped with
headlights as standard equipment.
．
If the headlight is not equipped, be sure to turn
the headlight switch "
discharge.
" position to
" position to switch
" position to switch
" to prevent battery

Stater button

To starter the engine, press the starter button,
with the ignition switch ON ( ) and the engine
stop switch at RUN (
CAUTION:
See starting instructions prior to starting
engine (see page 42 for details).
NOTE:
If the starter switch is pushed with the ignition
．
switch " " and the engine stop switch "
starter motor will be activated but the engine
will not start. To start the engine, be sure to
position the engine stop switch at "
22
)
", the
".