Using The Battery; Installing The Battery; Removing The Battery - UTStarcom 860 User Manual

LCD Displays
Side Key Functions.
- Adjusts the earpiece volume and moves the cursor
up the menu during a call.
- Mutes the ring tone if pressed at an incoming call.
- Adjusts Voice Call ring volume and allows Menu
scrolling in the Standby mode.
- Adjusts earpiece volume and allows Menu scrolling
Side Up
during a call.
- Increases volume while playing sound in the Ringer
list.
- Adjusts the earpiece volume and moves the cursor
down the menu during a call.
- Mutes the ring tone if pressed at an incoming call.
- Adjusts Voice Call ring volume and allows Menu
scrolling in the Standby mode.
- Adjusts earpiece volume and allows Menu scrolling
Side Down
during a call
- Decreases volume while playing sound in the Ringer
list
- From Standby Mode, use for quick access to the
'Camera' menu and taking pictures.
- In addition, press and hold to directly go to the Take
Camer key
Picture mode, skipping the Camera menu.
26

Installing the Battery

Put the metal locators of the battery into the hole located at
the bottom of the unit, as shown in the figure below.
Press the upper side of the battery until you hear the "click"
sound.

Removing the Battery

While holding the button, push the battery up and remove it.

Using the battery

27