Check Bios Message - Maxtor SATA/150 Installation Manual

Check BIOS Message

Power on your system and look for an on-screen BIOS message (see Figure 9) that refers to the Maxtor SATA/
150 PCI Card. This message indicates that the card has been properly detected by your motherboard. If you do
not see this message, turn off your system and make sure that the card is seated properly in the PCI slot.
The SATA/150 PCI Card is a PCI Plug-n-Play (PnP) device that automatically detects attached hard drives. In most cases, you will
not need to make changes in the motherboard BIOS Setup utility; however, on some newer systems, you may be able to set the
boot order of SATA devices in the motherboard's BIOS Setup. For more information on BIOS Setup, consult your system manual
or the system manufacturer.
10 Check BIOS Message
Figure 9
SATA/150 PCI Card BIOS Message