Maxtor SATA/150 Installation Manual page 17

5. At the A:\ prompt, type X: (where X is the CD-ROM letter) and press Enter.
6. At the X:\ prompt, type SETUP and press Enter. Follow the on-screen prompts to complete the Windows
installation.
7. After installation, right-click on My Computer and select Properties from the popup menu.
8. In the System window, choose the Device Manager tab.
9. In the hierarchical display under Other Devices is a listing for PCI Mass Storage Controller. Click PCI Mass
Storage Controller then click the Properties button.
10. In the Properties window, choose the Driver tab then choose Update Driver and click Next.
11. Choose Search for a better driver than the one your device is using now (recommended) then click Next.
12. Insert the provided driver diskette or CD. (If you inserted a CD, close the language chooser that appears.)
13. Choose Specify Location then click Browse.
14. Browse to the Win 9X-Me folder on the CD or floppy.
15. Click the Next button. A message informing you that Win98-ME Maxtor SATA/150 PCI Card has been
detected should appear.
16. Click Next, then click Finish.
17. When asked if you want to restart your computer, remove any floppies or CDs then click Yes.
Install Windows Driver 13