Existing Windows Me Installation - Maxtor SATA/150 Installation Manual

Existing Windows Me Installation

The following section details the installation of SATA/150 PCI Card drivers on a system that has Windows Me
already installed and running.
1. After installing the SATA/150 PCI Card and configuring the hard drive, power up the system and boot into
Windows.
2. The Add New Hardware Wizard will appear, informing you that it has found a PCI Mass Storage Controller.
3. Click Next, then from the generated list box, choose Specify the location of the driver (Advanced).
4. Click Next, then from the generated choices, choose Specify a location.
5. Insert the provided driver diskette or CD. (If you inserted a CD, close the language chooser that appears.)
6. Choose Specify a location then click Browse.
7. Browse to the Win 9X-Me folder on the CD or floppy.
8. Click Next. A message informing you that Windows Me has found Win98-ME Maxtor SATA/150 PCI Card
should appear.
9. Click Next, then click Finish.
10. When asked if you want to restart your computer, remove any floppies or CDs then click Yes.
14 Install Windows Driver