Maxtor SATA/150 Installation Manual page 25

4. When the Windows XP Setup window is generated, press S to specify an Additional Device(s).
5. Insert the driver diskette into drive A: and press Enter.
6. Choose WinXP Maxtor SATA/150 PCI Card from the list that appears on screen, and then press Enter.
7. Press S to use the driver on the floppy disk and then press Enter to continue with installation.
8. The Windows XP Setup screen will appear again saying "Setup will load support for the following mass
storage devices:" The list will include WinXP Maxtor SATA/150 PCI Card. If there are any additional devices
to be installed, specify them now then continue to the next step.
9. From the Windows XP Setup screen, press Enter. Setup will now load all the drivers and complete the
Windows XP installation.
Install Windows Driver 21