Loading The Batteries; Removing The Batteries - Citizen REF CH-452 Instruction Manual

LOADING THE BATTERIES

(Batteries supplied with the unit should be loaded in compartment before you use
the blood pressure monitor.)
1
Open the cover of battery compartment.
Pressing the hook down, pull the cover toward you to open.
Hook
Battery
cover
Lug (projecting section)
2
Place batteries in the compartment.
Put the batteries paying attention to the positive and negative terminal symbols
and .
- Eng 10 -
4 "AA" batteries
Battery
compartment
* If the Blood pressure monitor
is left unused for an extended
period of time, the batteries
should be removed from the
compartment.
3
Close the battery cover.
Fitting the lugs of the cover
at the mating recesses of the
battery compartment body, push
the hook to close the cover.

REMOVING THE BATTERIES

• When the icon is displayed or nothing appears in the display, replace the old
batteries with four new ones. All four batteries should be changed at once.
• The memory is erased if the batteries are removed for replacement. It is
recommended to make note of the data stored in memory prior to changing
batteries.
• Do not use rechargeable batteries.
• Do not use alkaline (LR6) and manganese (R6P) batteries together.
• Batteries included are for demonstration purposes only. Battery life may be
shorter than specifi ed.
• When disposing of used batteries, comply with governmental regulations or
environmental public institution's rules that apply in your country/area.
- Eng 11 -
LOADING THE BATTERIES
Fit the lugs (projections) at
the recesses.