Clearing The Reset Reminders - Carrier Edge TP-PRH Owner's Manual

ADVANCED PROGRAMMING OPTIONS

Clearing the reset reminders

The thermostat tells you when it's time to change the UV light in the evaporator coil
box connected to the furnace (if equipped), humidifier pad (if equipped), and
furnace filter. (See page 47 for more information.) When the reminder icons are
displayed on the screen, pressing and holding the done button for about three
seconds clears all reminders on the screen. This might not be the best option when
you have multiple reminders but have done only one of the tasks. This option lets
you reset the reminders individually.
1. Open the door.
2. Press and hold the buttons underneath the heat and
cool setpoints simultaneously (the two bottom buttons
on the right). The screen will display 01 and up to three
reset reminders, as enabled by your installer. One of the
reminders will flash; the display will show the percent-
age of time used by that reminder item.
3. Repeatedly press the set button until the reminder you
want to clear flashes.
4. Press and hold the done button for about three seconds to remove the re-
minder. The percentage associated with it will go down to zero.
35