Download  Print this page

Assembly - Husqvarna H342SG Owner's Manual

42 inch mower grass catcher
Hide thumbs

Advertisement

1
HANG SUPPORT ASSEMBLY ON
REAR DRAWBAR (See Fig. 1)
1. Slide flanges of support assembly into drawbar slots
first, then, pivot backwards inserting pin into drawbar
pin hole.
2. Be sure support assembly is seated properly, then
secure with retainer spring.
INSERT
FLANGES
FIRST INTO
DRAWBAR
SLOTS
DRAWBAR
PIN HOLE

ASSEMBLY

SUPPORT
ASSEMBLY
DRAWBAR SLOTS
RETAINER
SPRING
FIG. 1
2
MOUNTING COVER ASSEMBLY TO
SUPPORT ASSEMBLY (See Fig. 2)
NOTE: For ease of assembly, you may wish to obtain the
assistance of another person for mounting cover assembly
to tractor.
1. Position cover assembly on ground behind tractor.
2. Lift and rotate cover to align cover brackets with support
assembly tubes.
3. Slide cover assembly down onto the support tubes.
COVER
ASSEMBLY
PIN
5
SUPPORT
ASSEMBLY
03024
FIG. 2

Advertisement

loading

  Related Manuals for Husqvarna H342SG