Technical Data Technical Data - Husqvarna Brush Cutter User Manual

Technical data
Technical data
Engine
3
Cylinder displacement, cm
Cylinder bore, mm
Stroke, mm
Idle speed, rpm
Recommended max. fast idle speed, rpm
Speed of output shaft, rpm
Max. engine output, acc. to ISO 8893, kW/ rpm
Catalytic converter muffler
Speed-regulated ignition system
Spark arrestor mesh
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, mm
Fuel and lubrication system
Manufacturer/type of carburettor
Fuel tank capacity, litre
Weight
Weight without fuel, cutting attachment and guard, kg
Noise emissions
(see note 1)
Sound power level, measured dB(A)
Sound power level, guaranteed L
Noise levels
(see note 2)
Equivalent noise pressure level at the operator's ear,
measured according to EN/ISO 11806 and ISO 7917,
dB(A), min./max.:
Vibration levels
Vibration levels at handles, measured according to EN/
ISO 11806 and ISO 7916, m/s
At idle, left/right handles, min.:
At idle, left/right handles, max.:
At max. speed, left/right handles, min.:
At max. speed, left/right handles, max.:
Note 1: Noise emissions in the environment measured as sound power (L
Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various
working conditions with the following time distribution: 1/2 idling and 1/2 max speed.
NOTE! The noise pressure level at operator's ear and vibrations on the handles are measured with all the approved cutting
attachments for the machine. The table indicates the lowest and highest values.
Approved accessories
Grass blade/grass cutter
Trimmer head
Support cup
24 –
English
TECHNICAL DATA
142RB
41,5
40
33
2600
10400
8060
1,3/6500
No
No
No
Ikeda Denso
NGK BPMR 6Y
0,6-0,7
Walbro WYJ
1,0
11,5
114
dB(A) 117
WA
97/98
2
1,4/1,4
1,4/1,4
1,5/2,3
11,5/9,0
Type
Multi 275-4 (Ø 275 4 teeth)
Multi 300-3 (Ø 300 3 teeth)
Trimmy S II
Trimmy H II
Auto 55
Fixed
152RB
50,2
44
33
2600
10400
8060
1,5/6500
No
No
No
Ikeda Denso
NGK BPMR 6Y
0,6-0,7
Walbro WYJ
1,0
11,5
114
117
97/98
1,4/1,4
1,4/1,4
1,5/2,3
11,5/9,0
) in conformity with EC directive 2000/14/EC.
WA
Cutting attachment guard, Art. no.
531 00 77-01
531 00 77-01
531 00 77-01
531 00 77-01
531 00 77-01
-