Sharp MD-SR75H Operation Manual page 43

Error Messages : continued
ERROR MESSAGES MEANING
NO DISC A disc has not been loaded.
Poor connection of the digital cable.
No output signal comes out from the
NO SIGNAL
connected unit to playback.
(noSIG.)
PLAY MD You recorded on a playback-only
disc.
(PLAYmd)
POWER ? Improper power is being supplied.
The write protection tab of a MiniDisc
is set to the protected position.
PROTECTED
You tried to record on a playback-
only disc.
Since a track number is currently
SORRY
being located or updated, the unit
(SORRY)
cannot accept your command.
TEMP OVER The temperature is too high.
(TEMP!)
There is an error in the recording
TOC FORM (**)
signal.
(Tform**)
There is no space left for recording
character information (track names,
TOC FULL
disc names, etc.).
The track has been protected from
Tr. Protect
being erased.
A disc which contains data other than
? DISC
music was played.
(? DISC)
There is an error in the signal re-
corded on the disc.
( ) : Error messages seen on the remote control.
Number or symbol appears in (*) position.
Load a disc.
Connect the digital cable securely.
If the portable CD player has a function to prevent sound
skips, deactivate it.
Playback with the connected unit.
Replace it with a recordable disc.
Use one of the specified power sources.
Move the write protection tab back to its original position.
Replace it with a recordable MiniDisc.
Wait for a while and try the operation again.
Turn off the power, and wait for a while.
Erase all of the tracks, and then record again.
Replace it with another recordable disc.
Edit the track with the device on which it was recorded.
A disc which contains non-music data cannot be
played.
Replace it with another recorded disc.
Web-site: www.sharp.co.uk/support
REMEDY
Help Line: 0990 274277 (office hours)
43